£10.14
This Gorilla Contact Adhesive features a crystal-clear formula designed for strong permanent bonds. It creates a 100% waterproof seal that withstands washing machines and rain effectively. Ideal for flexible applications including fabric and glass on any project.
- Bonds metal, wood, ceramic and leather securely together.
- Dries completely clear without staining transparent surfaces like glass.
- Repositionable for up to four minutes during initial setting phase.
- Paintable surface allows finishing work once fully cured for twenty-four hours.
- Contains xylene and ethylbenzene requiring protective gloves during application.
- £10.14
- £10.14
- Unit price
- per
Shopped From |
M&S
Duties & Customs (You Pay)
Import fees may apply on arrival, and you must pay any customs charges. Prices exclude duties. Learn More: Shipping Policy | Terms and Conditions
Description
xProduct Information
Gorilla Contact Adhesive is a flexible, fast-drying, crystal clear glue that creates a strong, permanent bond. Once fully cured, this glue is both paintable and waterproof meaning it's washing machine safe and can withstand rain.
Features
Repositionable - Holds in seconds but allows flexibility when positioning., 100% Waterproof - Washing machine safe and can withstand rain, ideal for fabrics., Crystal Clear - Applies and dries clear - ideal for glass., Bonds - Fabric, metal, glass, wood, ceramic, leather, paper, rubber and more.
Preparation and Usage
All surfaces should be clean and dry. 1 Apply Squeeze tube gently at crimped end to dispense product slowly through nozzle. Do not apply too much pressure to tube. Apply adhesive to each surface to be bonded. Best results achieved when applied at room temperature (10°C to 32°C).
2 Position Allow adhesive to partially dry. a. For Maximum Bond Strength: Wait approximately 2 minutes before joining surfaces. b. For Repositionable Bonds: Wait approximately 1 minute before joining surfaces. Repositionable for 2-4 minutes depending on surface type.
3 Press Press surfaces firmly together. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and/or when used on non-porous surfaces. Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface.
Safety Warning: Note: Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces. Gorilla Contact Adhesive Contains: Xylene; Ethylbenzene. DANGER. Highly flammable liquid and vapour. Causes skin irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. In case of fire: Use water spray, foam, dry powder or CO to extinguish. Dispose of contents in accordance with local, state or national legislation.
Ingredients
Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol).
Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol, Trimethoxyvinylsilane).
May produce an allergic reaction.
